How to Refill Ink Stamp and Rubber Stamp

Re-inking of Xstamper rubber stamps is an easy process simplified by the provision of a re-inking diagram. Follow it carefully, keeping in mind that an Xstamper rubber stamp requires 2 - 6 drops only and should not be over-inked. 12-hours should be allowed to elapse after re-inking before you add more ink.

Changing the ink color of your rubber stamp is not recommended as ink formulas for each color are different and do not mix well. Mixing colors results in blurry impressions as the ink holding pores of Xstamper rubber ink stamps can get blocked when a different ink formula is used. True colors cannot be obtained by mixing different formulas e.g. a black ink formula mixed with red will not render a true red.

Yes, we stress that you always ensure that you are using Xstamper ink as all ink brands are not the same. The ink formula of another brands may not be compatible with Xstamper rubber stamps . If you have any question as to which ink to use, please do not hesitate to ask us.

Occasionally, lint and paper dust may adhere to the surface of your Xstamper. To clean, simply, take a piece of cellophane tape and press it across the rubber stamp with your finger. When you remove the tape, you will remove the residue as well. As you stamp, you will find the clarity of the impressions made by your Xstamper rubber stamp as clear as the day it was bought.